Click here for PDF version:

MATERIAL SAFETY DATA SHEET

SECTION 1: IDENTIFICATION OF PRODUCT

 

TRADE NAME:	AB MARATHON SPRAY BUFF/ CONDITIONER
PRODUCT NUMBER:	ASB-02-015/-025
WHMIS CLASS:	B3
DESCRIPTION:
PRODUCT USE:	FLOOR FINISH
TRANSPORT:	NOT REGULATED
HMIS CODE:	HEALTH (1) FIRE (2) REACTIVITY (0) SPECIFIC (B) 0: Minor 1: Light 2: Moderate 3: High 4: Dangerous
SUPPLIER:	Estrie Products Internatinal 200 Bank Street Sherbrooke, Quebec, Canada J1H 4K3 EMERGENCY PHONE NUMBER: 819-829-3300 613-996-6666 (Canutec)

 

SECTION 2: HAZARDOUS INGREDIENTS

 

HAZARDOUS INGREDIENTS	# CAS	%	T.L.V.	LD50
ACRYLIC POLYMER	N/D	1 - 3	N/D	N/D
ISOPARAFFINIC HYDROCARBON SOLVENT	64742-48-9	10 - 15	N/D	5000 mg/kg (oral-rat)

 

SECTION 3: PHYSICAL PROPERTIES

 

APPEARANCE AND ODOUR:	Opaque off-white liquid, mild odour.
BOILING POINT (°C):	N/D
SPECIFIC GRAVITY (H20=1):	0.85
VAPOR DENSITY (Air=1):	N/D
MELTING POINT (°C):	Approx.0
EVAPORATION RATE:	1 (Water = 1)
SOLUBILITY IN WATER (%):	N/D
VOLATILE MATTER (% Vol.):	N/D
VAPOR PRESSURE (mm of Hg):	N/D
pH:	8 - 9

 
 

SECTION 4: FIRE AND EXPLOSION HAZARD DATA

 

FLAMMABLE:	YES (x) NO ( )
IF YES, IN WHICH CONDITIONS:	Combustible.
FLASH POINT (°C):	67
METHOD:	TCC
AUTO-IGNITION TEMPERATURE (°C):	N/D
FLAMMABLE LIMITS (% VOL.IN AIR):
LOWER LIMIT: N/D	UPPER LIMIT: N/D
EXTINGUISHING MEDIA: WATER SPRAY ( ) WATER FOG (X) CARBON DIOXIDE (X)) FOAM ( ) DRY CHEMICAL (X) OTHERS ( )   SPECIAL FIRE FIGHTING PROCEDURES: N/D   UNUSUAL FIRE AND EXPLOSION HAZARDS: N/A

 

SECTION 5: REACTIVITY DATA

 

STABILITY: UNSTABLE ( ) STABLE ( x) CONDITIONS TO AVOID: High temperatures.

HAZARDOUS POLYMERIZATION: MAY OCCUR ( ) WILL NOT OCCUR ( x) CONDITIONS TO AVOID: N/A

INCOMPATIBILITY (materials to avoid): WATER ( ) BASE ( ) OXIDIZING AGENTS (x )Chlorine ACID ( ) CORROSIVE ( ) OTHERS ( )

HAZARDOUS DECOMPOSITION PRODUCTS:

Normal products of combustion.

 

SECTION 6: PREVENTIVE MEASURES

 

VENTILATION:	General ventilation normally adequate.
RESPIRATORY PROTECTION:	Not normally required if good ventilation is maintained.Avoid creating mist/vapor.
EYE PROTECTION:	Not required under normal use conditions.
HAND PROTECTION:	Not required under normal use conditions.
OTHER PROTECTIVE EQUIPMENT:	N/D
HANDLING:	Keep out of the reach of children. For industrial use only.
STORAGE:	Store in a cool, dry and well ventilated place. Avoid heat, sparks and flame.

 

SECTION 7: SPILL OR LEAK PROCEDURES

 

STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED:	Small spills may be absorbent with non-reactive absorbent and placed in suitable, covered, labelled containers. Prevent large spills from entering sewers or waterways. Contact emergency services and supplier for advice.
WASTE DISPOSAL METHOD:	According to municipal, provincial and federal regulations.
OTHER INFORMATION:

 

SECTION 8: HEALTH HAZARD DATA

  OC.

ABSORPTION ROUTE:	SKIN (x)	EYES (x)
	INHALATION (x)	INGESTION (x)

 

EFFECTS OR OVEREXPOSURE:	In persons with pre-existing skin disorders, may have more irritating effect. General medical conditions may be aggravated by exposure.
SKIN:	May cause slight to mild irritation.
EYES:	Contact may cause slight to mild irritation.
INHALATION:	May cause irritation to nose, throat and respiratory tract. Contact with lungs may cause severe health effects.
INGESTION:	May cause irritation to mouth, throat and stomach.
CARCINOGENIC:	None known.
MUTAGENIC:	None known.
TERATOGENIC:	None known.

 

SECTION 9: FIRST AID PROCEDURES

 

SKIN:	Immediately wash with soap and water. If irritation persists, get medical attention.
EYES:	Immediately flush with water for 15 minutes. If irritation persists, get medical attention.
INHALATION:	Remove to fresh air.If breathing is affected get medical attention.
INGESTION:	Do not induce vomiting. Rinse mouth with water, then drink one glass of water.Get medical attention immediately. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness or is convulsing.

 

SECTION 10: PREPARATION INFORMATION

 

PREPARED BY:	(D.Desrochers A/B)
REVISION DATE:	January 01, 2003
REPLACING OLD VERSION FORM:	April 01, 2002
REASON:	Section 10

ESTRIE PRODUCTS INTERNATIONAL has compiled the information and recommendations contained in this Material Safety Data Sheet from sources believed to be reliable and to represent the most reasonable current opinion on the subject when the MSDS was prepared. No warranty, guaranty or representation is made as to the correctness or sufficiency of the information. The user of this product must decide for himself what safety measures are necessary to safely use this product, either alone or in combination with other products.

N/A: Not applicable	N/D: Not determined
N/E: Not established