TRADE NAME:	RUBBER REINFORCED MATTING
PRODUCT NUMBER:	MP601033 R, MSG-601233 CY ITEM: RRM-33-363
WHMIS CLASS:	NOT CONTROLLED
DESCRIPTION:	POLYVINYL CHLORIDE AND NITRILE RUBBER
PRODUCT USE:	FLOOR MATTING
TRANSPORT:	NOT REGULATED
HMIS CODE:	HEALTH ( ) FIRE ( ) REACTIVITY ( ) SPECIFIC ( ) 0: Minor 1: Light 2: Moderate 3: High 4: Dangerous
SUPPLIER:	Estrie Products International 200 Bank Street Sherbrooke, Quebec, Canada J1H 4K3 EMERGENCY PHONE NUMBER: 819-829-3300

HAZARDOUS INGREDIENTS	# CAS	%	T.L.V.	LD50
* CARBON BLACK * = May be present in some products	1333-86-4	0.5 - 1.5	3.5 mg/m3	> 8,000 mg/kg (oral-rat)
CRYSTALLINE SILICA	14808-60-7	0.1 - 1	0.05 mg/m3	7,950 mg/kg (oral-rat)
CHLORINATED PARRAFIN	63449-39-8	1 - 5	N/D	N/D
TITANIUM DIOXIDE	13463-67-7	0.1 - 1	10 mg/m3	> 10,000 mg/kg (oral-rat)

FLAMMABLE:	YES ( ) NO (x)
IF YES, IN WHICH CONDITIONS:
FLASH POINT (°C):	391 (PVC)
METHOD:	N/D
AUTO-IGNITION TEMPERATURE (°C):	454 (PVC)
FLAMMABLE LIMITS (% VOL.IN AIR):
LOWER LIMIT: N/D	UPPER LIMIT: N/D
EXTINGUISHING MEDIA: WATER SPRAY (x) WATER FOG ( ) CARBON DIOXIDE ( ) FOAM (x) DRY CHEMICAL (x) OTHERS ( )   SPECIAL FIRE FIGHTING PROCEDURES: Wear positive pressure self-contained breathing apparatus. Personnel not having suitable respiratory protection must leave the area to prevent significant exposure to toxic combustion gases.   UNUSUAL FIRE AND EXPLOSION HAZARDS: When force to burn, about 97 % of the combustion gases from vinyl resin will be a combination of HCl, CO, CO2, they must be considered toxic.

STABILITY: UNSTABLE ( ) STABLE (x) CONDITIONS TO AVOID: None

HAZARDOUS POLYMERIZATION: MAY OCCUR ( ) WILL NOT OCCUR (x) CONDITIONS TO AVOID: None known.

INCOMPATIBILITY (materials to avoid): None known. WATER ( ) BASE ( ) OXIDIZING AGENTS ( ) ACID ( ) CORROSIVE ( ) OTHERS ( )

HAZARDOUS DECOMPOSITION PRODUCTS:

When expose to flame, HCl, CO, and CO2 will be emitted.

SECTION 6: PREVENTIVE MEASURES

 

VENTILATION:	N/A
RESPIRATORY PROTECTION:	Not required.
EYE PROTECTION:	Safety glasses against dust.
HAND PROTECTION:	Gloves.
OTHER PROTECTIVE EQUIPMENT:	Not required.
HANDLING:	Practice a good personal hygiene.
STORAGE:	Store in a dry and cool area.

 

SECTION 7: SPILL OR LEAK PROCEDURES

 

STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED:	Reuse material or dispose.
WASTE DISPOSAL METHOD:	Follow local, provincial and federal regulations. Recycle if possible.
OTHER INFORMATION:

 

SECTION 8: HEALTH HAZARD DATA

 

ABSORPTION ROUTE:	SKIN (x)	EYES (x)
	INHALATION (x)	INGESTION ( )

 

EFFECTS OF OVEREXPOSURE:	No adverse health effects are expected. The ingredients listed in section 2 are incorporated in the product and will not be released. They are provided for information.
SKIN:	Contact not expected to be harmful.
EYES:	Not expected to be harmful.
INHALATION:	Not expected to be harmful.
INGESTION:	N/A

 

SECTION 9: FIRST AID PROCEDURES

 

SKIN:	Wash with soap and water.
EYES:	Flush with water and remove the dirt particles.
INHALATION:	Move the person to fresh air, give artificial respiration if necessary.
INGESTION:	Call a physician.

 

SECTION 10: PREPARATION INFORMATION

 

PREPARED BY:	Diane Desrochers
REVISION DATE:	November 01, 2007
REPLACING OLD VERSION FORM:	September 13, 2007
REASON:	Sections 1, 2 and 10

ESTRIE PRODUCTS INTERNATIONAL has compiled the information and recommendations contained in this Material Safety Data Sheet from sources believed to be reliable and to represent the most reasonable current opinion on the subject when the MSDS was prepared. No warranty, guaranty or representation is made as to the correctness or sufficiency of the information. The user of this product must decide for himself what safety measures are necessary to safely use this product, either alone or in combination with other products.

N/A: Not applicable	N/D: Not determined
N/E: Not established